These Faithfull punches are made from uniformly heat treated carbon steel and are used for removing pins in parallel holes. The removal of the pins should first be started with a hand or taper punch to avoid damage to the end of the parallel punch.
Tip Diameter: 3mm (1/8in). Length: 100mm (4in).
Specifications
Catalog Page Number
55
Categories
Hand Tools
Category
Engineering Tools
Country Of Origin
India
Form
Pin Punch
Length
100mm
Point Diameter
3.0mm
Type
Engineering Tools
selection not available, try a different combination
selection not available, try a different combination
These Faithfull punches are made from uniformly heat treated carbon steel and are used for removing pins in parallel holes. The removal of the pins should first be started with a hand or taper punch to avoid damage to the end of the parallel punch.
Tip Diameter: 3mm (1/8in). Length: 100mm (4in).
Specifications
Catalog Page Number
55
Categories
Hand Tools
Category
Engineering Tools
Country Of Origin
India
Form
Pin Punch
Length
100mm
Point Diameter
3.0mm
Type
Engineering Tools
selection not available, try a different combination
selection not available, try a different combination